Harley Davidson Exhaust Installation

Slide the exhaust pipe and muffler assembly onto the cylinder head studs.

Harley davidson exhaust installation. Ive skipped that step and had to take the clip off again. Twist until the clip starts to go over to one side of the pipe then gently slip it off pulling it away from the pipe at the same time. Enhanced Performance With the Right Back Pressure.

Exhaust installation question. How to Install Harley Exhaust Gaskets. From the get-go I noticed the exhaust smelled like it was running rich.

Harley-Davidson exhaust gaskets are one-time use components. Jump to Latest Follow 1 - 9 of 9 Posts. Go to AutoZone and rent a frost plug install tool note the curve on the end where the adapter drivers fit.

Harley Davidson V-Rod Forum. Expert Gear Advice From Riders. Loosen up the head flanges and see if you can rotate the head pipes away from the frame a little.

Align the muffler and support brackets install the bolt and lock nut. All models require ECM calibration with Screamin Eagle Pro Street Tuner for proper installation. With the bracket removed and clamp loosened remove the crossover pipe using a twisting motion.

Also some type of crows foot or offset wrench. Remove the support bracket using a 12 wrench before sliding the bracket off of the pipe. Made from aluminum thread that is woven into a mesh the gaskets deform upon compression by the exhaust pipe and flange.