Harley Davidson Engine Oil Drain Plug Location

Harley drain plug installation is not difficult but things can quickly become difficult if a drain plug is installed incorrectly.
Harley davidson engine oil drain plug location. This drain plug can be used for Harley Davidson engine and transmission plugs from approximately 1980s to present day models. Find the drain plug in the bottom side of the chain case. Before you do an oil change run the engine up to operating temperature.
You will need to use a T-30 to turn the. Lube the gasket on a new oil filter with engine oil and install the new filter. Follow the center of the derby cover downward and find it protruding from the bottom of the inner primary case.
If a drain plug is not installed straight or is installed dirty the plugs threaded allocation in the case can become permanently damaged. Pull the drain hose out of its retaining bracket then remove the drain plug with a flat-head screwdriver. Hand-tighten the oil filter until the gasket contacts the filter mounting surface plus an additional 12-34 turn.
Park on a level surface where the service will be performed. After you remove the bolt inspect it being magnetic it will attract any metal shavings in the crankcase. Starting in 2007 this plug fits the engine.
Where is the oil drain plug located on 2003 Harley-Davidson sportster custom 1200. This is the beginning of the final leg of your oil change. It is located on the bottom right side of the oil pan.
And when you shut off the engine do it while still upright. The drain plug is located right below the bike as indicated in the picture. Location of oil drain plug on harley davidson road.