Harley Davidson Engine Light Stays On

In the affected motorcycles certain optional performance electronic control module calibrations may allow higher engine rpms that could result in engine vibrations that cause the ignition switch to move from the IGN ignition on to ACC accessory only position which will shut the engine.

Harley davidson engine light stays on. There is something else causing the oil light to illuminate. Exhaust works and sounds great very happy with it. Pull the spark plugs out and hit the starter.

If its not like Dave said the wore bits of the old cam pad sometimes gets into areas especially the pressure relief valve on the Cam Plate and causes problems. It can warn of potential problems with your engine control system your. The light will turn on for 4 seconds then off for 6 seconds.

Harley-Davidson 500 Street Tech. Look for any Harley error codes. May be as simple as a dead short in the oil pressure switch or indicator light wiring.

If the starter does not turn the engine put the bike in first gear and have someone push you making sure the engine is free. Hi Dino_deangel it should be noted that the reasons your engine light stays on constantly or flashes and your bike will or will not start and may turn over or not these conditions will vary from bike to bike depending on the year make and model and you should always refer to your ownersservice manual for proper diagnostic procedures. Running the bike for 30 seconds re-logs a DTC of 23 32.

Turn the ignition switch on and wait for 10 seconds. The Night Train is an all-black addition to the Harley family and features a not-so-reliable V-twin engine thats been a subject of many complaints and a 2007 recall regarding oil leaks that could potentially lead to a fire. The light stays on for two or three seconds and goes out.

Now clear the error log. Once again boot the ECM. Except now my engine check light remains lit and I cant figure out why.